Find Hard Polycarbonate Sheet, Hard Polycarbonate Sheets, Polycarbonate Sheet Cutting on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Brand Glasses Frames > Hard Polycarbonate Sheet Sheets Cutting
Hard Polycarbonate Sheet Sheets Cutting

Hard Polycarbonate Sheet Sheets Cutting

Payment Type: L/C,T/T,Western Union
Terms of Trade: FOB,CFR,CIF,EXW
Delivery Time: 1- 20 Days After Payment Days

Basic Info

Model No.: PC Sheet-19103103

Product Description

PC endurance board product introduction:

Polycarbonate sheet (polycarbonate sheet) is called PC board and is excellent in impact resistance and light transmission.


Physical property analysis of pc endurance board:

(1) Mechanical properties

Impact resistance: PC board has strong impact resistance, 250 times stronger than traditional glass and 30 times stronger than acrylic.

Tensile strength: PC board has good heat resistance, so its tensile strength is still 350kgf / cm2 even at 120 °C.

Flexural strength and flexural modulus: PC board has excellent bending resistance and does not crack even when the bending angle is 80-90°.

Anti-fatigue and anti-submarine change: The anti-submarine of PC board becomes one of the best in thermoplastic plastic. Even at high temperature, its latent change is still small, and the stress is steep and small.

(2) Thermal properties

Heat distortion temperature: The heat distortion temperature of the PC board was 135 ° C, and it was continuously used at a high temperature of about 120 ° C.

Linear expansion coefficient: one of synthetic resins having a small linear expansion coefficient.

Embrittlement temperature: The embrittlement temperature of PC is extremely low compared with general plastics, it is -40 °C, and the continuous application of low temperature is about -30 °C.

Flammability: PC board is one of the flame retardant plastics, which does not hit toxic gases when heated at high temperatures.

Heat yield: The heat yield of PC board is not much different from that of general synthetic resin. It is 1/4 of glass, 1/300 of iron, 1/1000 of aluminum and 1/2000 of copper. It is a material with excellent heat preservation. .

(3) Optical properties

Transmittance: The transmission transmittance of a 1 mm thick PC board is 90%, and the transmission transmittance of a 5 mm thick is 85%, so it is suitable for glass.

The company's PC board has a layer of anti-ultraviolet layer on its surface. Even if its optical properties are continuously exposed, the mechanical properties are not significantly affected.

(4) The nature of the sound insulation:

The PC board at the same thickness has a better sound-blocking effect than the momentum.

(5) Weight:

Under the same thickness and area, the weight of the PC board is half that of the glass, which can save a lot of difficulty and freight for handling and construction.


PC board engineering plastics application areas:

1. Building materials industry

Polycarbonate sheet has good light transmission, impact resistance, UV radiation resistance and dimensional stability of the product and good molding processability, and has obvious technical performance advantages compared with the inorganic glass traditionally used in the construction industry.

2. Automotive Manufacturing

Polycarbonate has good impact resistance, heat distortion resistance, good weather resistance and high hardness, so it is suitable for the production of car and light truck parts, such as lighting systems, instrument panels, heating plates, defrosters and polycarbonate. Bumper made of ester alloy.

3. Medical instruments

Such as the production of syringes, surgical masks, disposable dental appliances, etc.

4. Empty day

With the rapid development of space and technology, the requirements for various components in aircraft and celestial bodies are constantly increasing, and the use of PCs in this field is also increasing.

5. Packaging field

Polycarbonate products have the advantages of light weight, good impact resistance and transparency, and are not deformed and kept transparent when washed with hot water and corrosive solution, in some fields. The PC bottle has completely replaced the glass bottle.

6. Electronic appliances

Polycarbonate resin is mainly used in the production of various food processing machinery, power tool housings, body, brackets, refrigerator freezer drawers and vacuum cleaner parts. Moreover, polycarbonate materials have also shown great use value for computers with high precision parts, video recorders and important components in color TV sets.

7. Pptical Lens

Optical grade PC board can be used for cameras, microscopes, telescopes and optical test instruments, film projector lenses, copier lenses, infrared autofocus projector lenses, laser beam printer lenses, and various prisms, polygon mirrors, etc. PC boards The optical lens can also be used for lens materials for children's glasses, Sunglasses and Safety Glasses and adult glasses.

8. Ptical illumination

It is used in the manufacture of large lampshades, protective glass, left and right eyepieces of optical instruments, etc. It can also be widely used for transparent materials on airplanes.

9. Electronic appliances

The PC board is an excellent insulating material for manufacturing insulated connectors, coil frames, sockets, bushings, telephone housings and parts, and battery cases for miner's lamps. CD, telephone, electronic computer, video recorder, telephone switch, signal relay and other communication equipment.

Transparency PC Plastic Rod


Specification:

Item name

PC ( Polycarbonate) sheet

Type:

extruded

Size:

1000*2000mm

Thickness:

15---200mm

Density:

1.2 g/cm³

Color:

Translucent

Brand name:

AHD

Material:

100% virgin material

Sample:

FREE

Acid resistance:

YES

Food Contact

YES


Physical Datasheet:

Item

PC sheet

Color:

clear

Proportion:

1.2g/cm³

Heat resistance (continuous):

125

Heat resistance (short-term):

135

Glass transition temperature:

150

Linear thermal expansion coefficient (average 23~100℃):

65×10-6 m/(m.k)

Average 23--150

65×10-6 m/(m.k)

Flammability(UI94):

HB

Tensile modulus of elasticity:

2400MPa

Dipping into water at 23 for 24h

13%

Dipping into water at 23

0.35%

Bending tensile stress/ Tensile stress off shock

70/- Mpa

Breaking tensile strain

˃50%

Compressive stress of normal strain-1%/2%:

18/35 MPa

Pendulum gap impact test

9 KJ/m2

Friction coefficient:

0.55

Rockwell hardness:

M75

Dielectric strength:

28 kv/mm

Volume resistance:

10 15Ω×cm

Surface resistance:

10 15Ω

Relative dielectric constant-100HZ/1MHz:

3/3

Critical tracking index(CTI)

600

Bonding capacity:

+

Food contact:

+

Acid resistance:

+

Alkali resistance

-

Carbonated water resistance:

0

Aromatic compound resistance:

-

Ketone resistance:

-


PC Sheet Photo:

Clear Polycarbonate Plate

Black Polycarbonate Plate


Other Products:

PE sheet
PA6 Sheet
POM Rod

Hdpe Plastic Sheets

PA6 Sheet

POM Rod

PP Sheet
POM Sheet
PU sheet

Polypropylene Sheet

POM Sheet

PU Sheet


Certification:

Polyethylene Sheet


Production Line:

Production Line of HDPE sheet


HDPE sheets


Packing of PC sheet

Exhibition:

Anheda group is invited to participate in domestic and international trade exhibitions every year as the most representative exhibitor,has widely attracted the attention of customers from all over the world.It making anheda group play more loudly, spread farther and have wider influence.

HDPE Sheets

FAQ:

Q1: Are you a manufacturer?

A1: Yes, AHD the the semi-finished engineering plastic products manufacturer in Shenzhen China since 1994s. Our main goods include [POM, HDPE, PP, PU, PA6, ABS, POM+GF, ESD POM, PA6+GF" sheet & rod.


Q2:How do I know your quality?

A2: Free sample will be able to verify our quality.


Q3: What`s payment?

A3: T/T,L/C,Western Union etc. About the payment details please feel free to contact free to contact us.Thank you!


Q4:Can you supply sample?

A4:Yes,we can supply you free small samples,but air cost will be paid by customers.


Q5:How many days will the samples be finished?And how about the mass production?

A5: Generally the samples will be sent immediately by the air express in 1--3 days, the leading time mass production is depended on the stock status and sizes

HDPE SHEETS


Shenzhen Anheda Plastic Products Co.,Ltd

 

Shenzhen Anheda Plastic Products Co., Ltd, Established in Shenzhen in 1994, AHD Engineering Plastic Products Co., Ltd is a comprehensive company that is engaged in the R&D, production and distribution of semi-finished engineering plastic in China, including HDPE, PP, PU, PVC, PEI, ABS / FR-ABS /, PA6 / PA6+GF / ESD PA6, POM / POM+GF / ESD POM / PTFE+POM, PC / PC+GF / PC+ABS / ESD PC SHEET & ROD.

AHD Products

Company Info
  • Company Name: Shenzhen Anheda Plastic Products Co.,Ltd
  • Representative: Yiqian Ye
  • Product/Service: PP Sheet , PA6 Sheet , ABS Sheet , HDPE Sheet , PU Sheet , POM Sheet
  • Capital (Million US $): 10 Million
  • Year Established: 1994
  • Total Annual Sales Volume (Million US $): Above US$100 Million
  • Export Percentage: 21% - 30%
  • Total Annual Purchase Volume (Million US $): Above US$100 Million
  • No. of Production Lines: 250
  • No. of R&D Staff: 21 -30 People
  • No. of QC Staff: 21 -30 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 30,000-50,000 square meters
  • Factory Location: No.2, Row 4 Xinfa Industrial zone Shajing Town, Bao'an District Shenzhen China 518125
  • Contact Person: Ms. Katherine Liu
  • Tel: 86-755-23270202
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters